kaikki kategoriat

Etusivu> Tuotantolinja > Zirkoniumlohkot

3D Pro Multilayer

3D Pro Multilayer

3D Pro multilayer restorations have better aesthetic performance, as their excellent translucent properties, it is becoming the first choice today in the cases with high aesthetic requirements.

Yhteystiedot
Merkinnöistä:

Restauraatioita on saatavilla monoliittisilla täysmuotoisilla kruunuilla, silloilla, viiluilla tai koko kaarella.

3D Pro Multilayer

  • Palvelumme
  • lisälaitteet
  • Tekniset tiedot
  • Kyselytiedot
Features of 3D Pro Multilayer

3D Pro multilayer has been introduced into dental practice as an alternative to metal-ceramic dental restorations. Compared to the traditional porcelain to metal restorations


  • Johdonmukainen VITA® Classic Shade Match

    VITA® Classic Shade on tiukasti tuotekehitysvaiheen ja myös vakiotuotannon seurannassa sävysovituksella.

  • aaa
    Glazed with Bloomden CeramStar® Glaze/Stain Kit

    Preparation: 3D Pro 3-unit bridge after milled and sintered and then glazed.

  • aaa
    Developed an improved flexural strength

    The flexural strength of this new material is 650-1100 MPa. These conveniences have made the 3D Pro multilayer zirconia used more and more for crowns and bridges inlateral applications.

  • feature分辨率2
    Excellent aesthetics performance

    Translucency can be regulated by controlling the absorption, reflection, and transmission of light through the material. The translucency is higher when the reluctance is low and the transmission is high.

  • feature分辨率2
    Compared to previous stage the strength as a trend

    Bloomzir® 3D Pro multilayer zirconia is unlike any other zirconia, it can exhibit a strength range from 650MPa to 1100MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.

  • feature分辨率2
    Monoclinic resistance

    Unique hydrolysis microstructure and chemical formulation by the hydrothermal treatment also resist degradation of aging which the cubic shifted to monoclinic state that can be observed in zirconia structure.

  • feature分辨率2
    High speed sintering cycle

    An excellent attributes is the fast sintering cycle which can ensure the strength, translucency and aging resistance simultaneously. The high-productivity sintering cycle allows for “inside furnace” time in 45 minutes.

  • feature分辨率2
    Low Wear Rate

    The average crystalline size of less than 0.5 μm and the Hydrolyzed powder properties are organized inside 3D Pro multilayer zirconia which enable 3D Pro multilayer zirconia to be long-term enamel wear behavior closed to the natural human teeth after several times of lab-test. 

Accessories for 3D Pro Multilayer
  • KeraaminenStar® Glaze/Stain Gingivaali Asettaa

    It contains 4 single masses as well as special liquids and accessories. The 3D pastes were specially developed for the aesthetic finalization and characterization of the gingival-colored parts of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LUE LISÄÄ
  • tarvikkeet分辨率
    KeraaminenStar® Glaze/Stain Vivid -setti

    Se sisältää 7 yksittäistä massaa sekä erikoisnesteitä ja lisävarusteita. 2D-pastat on kehitetty erityisesti litiumdisilikaatista ja 3D Pro Multilayeristä valmistettujen keraamisten restauraatioiden perusesteettiseen viimeistelyyn. Kaikki setin osat ovat saatavilla myös yksittäin.

    LUE LISÄÄ
  • tarvikkeet分辨率
    KeraaminenStar® Glaze/Stain Blossom -setti

    Se sisältää 17 yksittäistä massaa sekä erikoisnesteitä ja lisävarusteita. 2D- ja 3D-tahnat ja -peitsit on kehitetty erityisesti litiumdisilikaatista ja 3D Pro Multilayeristä valmistettujen keraamisten täytteiden ammattimaiseen esteettiseen viimeistelyyn. Kaikki setin osat ovat saatavilla myös yksittäin.

    LUE LISÄÄ
3D Pro Multilayer Technical Specifications
Tekniset tiedot
3D Pro Multilayer
ZrO2+HfO2+Y2O3 ≥ 99%
Y2O3 4.5%-10%
Al2O3 <0.15%
Density before sintering (g.cm-3) 3.15 0.05 ±
Density after sintering (g.cm-3) 6.07 0.02 ±
CTE (25-500°C) (K-1) 10.5 0.5 ±
Taivutuslujuus sintrauksen jälkeen (MPa) > 650
Ikääntyvän pinnan monokliinisen vaiheen sisältö <12%
Valonläpäisykyky <49%
Kemiallinen liukoisuus sintrauksen jälkeen (µg.cm-2) <100
Sytotoksisuus 0-taso
Radioaktiivisuus (Bq.g-1) <0.1
Sintrauslämpötila (°C) 1500
järjestelmät 98mm / 95mm / 92*75mm
Paksuus 12m / 14mm / 16mm / 18mm
20mm / 22mm / 25mm
aurinkolasit A1 A2 A3 A3.5 A4 / B1 B2 B3 B4
C1 C2 C3 C4 / D2 D3 D4 / BL1 BL2 BL3 BL4

 

Kyselytiedot